Safe Environments works hard to provide the highest level of accuracy and reliability for our clients across Australia and to provide professional evidence of compliance with building regulations and code
Water is then applied to the area within the perimeter wire ensuring full coverage of the surface is achieved. Testing must be carried out in perfectly dry conditions and should not be conducted in inclement conditions or when dew is present on the surface. With this form of testing as outlined in the ASTM D7877 guide, a special electrode brush is passed over the surface of the non-conductive membrane. However, not all ELD testing equipment can find breaches on vertical substrates, multiple horizontal breaches in a single test or test semi-conductive coatings – i.e. membranes such as Black EDPM, Black Butynol or polyurethanes tinted with Carbon black. This is the cheapest cost of time and materials to carry out the needed repairs.
AS 4654.1: Waterproofing Membranes for External Above Ground Use Testi
Wasting water along with time delays involved with flood testing in areas that are large and deep (as walls can leak as much as floors, joints and penetrations under hydrostatic pressure) is no longer viable nor acceptable. Electronic Leak Detection [ELD testing] is fast becoming the preferred testing method for builders, waterproof manufacturers and waterproofing contractors who understand time is money on a building site. The low voltage Vertical Surface Scanning roller listed under the guide for testing vertical substrates works by moistening the roller sleeve as the operator rolls the testing tool up the substrate forcing the water before it into any breaches. Given Vector Mapping requires a constant flow of water over a substrate, vector mapping is not able to test vertical substrates – even with an additive in the water to create a film on a given vertical surface, the accuracy is still not reliable. In areas where there are multiple breaches, further testing needs to be undertaken each time until no more breaches are identified. If there are only puddles on the surface, then the circuit would be incomplete resulting in missed breache
We are NATA Accredited which ensures that our testing methods and reporting systems are accurate and comply to the Australian Standards. Request a free quote today and ensure your surfaces meet national slip resistance requirements. At SlipTest Australia, we provide slip testing services across all states – from construction handover reports to legal compliance audits. Visit Standards Australia for up-to-date AU standards for slip resistance measurement and classification of pedestrian surface
Our slip ratings that we apply to flooring surfaces are endorsed by the National Association of Testing Authorities (NATA) ensuring quality and consistency by qualified scientists that you can rely on. Get in touch using the form below and our experts will get in contact soon! Interested in slip resistance testing or consulting for your organisation? Tests and reports are conducted using Australian and International Standards as well as The National Construction Code. Working with QED, the only NATA accredited laboratory in WA to perform and report on slip tests means our reporting is assured by an independent third party. Ongoing monitoring of in-situ flooring is conducted according to AS 4663 Slip resistance measurement of existing pedestrian surface
High Voltage Membrane testing [sometimes referred to as spark testing or holiday testing]. All ELD testing equipment is capable of testing nonconductive waterproof membranes. ELD Testing is quick, and efficient and allows for repairs and retesting immediately reducing downtime on site. Independent Testing Australia (ITA) is fully accredited to perform waterproofing membrane testing in accordance with the requirements of AS/NZS 4858 and provide NATA endorsed documentation. An exposed membrane that has de-laminated from its substrate can be more easily cut torn when force is applie
Our approach to property management is to conduct an initial visual assessment, identifying instances of highest risk and/or potential non-compliance. We are NATA Accredited which ensures that our testing methods and reporting systems are accurate and comply to the Australian Standards. Our technicians are highly trained and utilise the latest technology available including wet pendulum tests to ensure our clients have peace of mind and comply with their insurer’s requirements. Our technicians are highly trained and utilise the latest technology available including wet pendulum tests to ensure our clients have peace of mind
Slip ratings explained
Ramps require P3-P5 depending on the gradient and surface conditions. P3 (or R10) for dry conditions and P4 (or R11) for wet conditions on stair treads and landings. Commercial facilities should conduct risk assessments to determine the proper rating for each area. The appropriate slip resistance value for flooring materials depends on their expected use and conditions. Over time, your facility’s floors Weathering UV Exposure Testing may no longer meet slip resistance standard